Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Had to pull the upper alt to remove the wrong fitting. Using a short hose and a valve allowed me to safely drain the anti freeze into a couple jugs. We had to heat the 1/2 plug up to get it out, but it finally gave in. Reinstalled the alt and then the new elbow. On the test start we heard a...
Both my fittings were the same size. Are you sure you connected to the correct spot up top?
I used nine feet of heater hose but I went to the top of the motor and through the firewall in the center since it was the closest to the heater connections. Went for a small ride so the truck only...
As it happens I JUST bought mine a few hours ago. They are 3/4 inch pipe thread. We used an elbow to clear the dual alts and then installed a couple ball valves. Rain is coming so I won't get the actual hoses installed for a couple days, but everything is ready.
Hope this helps.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!