Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Well the new sending unit that i ordered from nappa was wrong.
1984 k30 driver side mount is not the correct one for the M-1028
Unless my tank is not original.
So i took a second look at my sending unit and found that there was gunk inside the box that the float arm goes into.
Clean it out with...
Hmmm , only thing i can think of bio diesel causing that is gunking up the float arm causing it to stick in the Full position.
Unlikely i would think tho.
I checked the ohms from the electrical clips to the black ground wire on the sending unit
WITH KEY OFF
left clip = 0 volts
right clip = 0 ohms
bottom clip = 0 ohms
WITH KEY ON
left clip = 14.45 volts
right clip = +4 ohms
bottom clip -6 ohms
Today i went to the junk yard and tried 4...
My fuel gage is also stuck on Empty.
I pulled the ground from sending unit to frame , gage still at Empty.
TMs say gage is shot. I followed step 3 anyways and removed the pink wire off the sending unit , gage goes to Full , grounded pink wire and gage goes back to Empty.
Tms now say sending unit...