Search results

Yep, was next to my buddy with the full tube crew cab Chevy. I had a display of my sheet metal axle housings and rims. My buddies truck

Here is the kit minus the DOM tube

Like i was discussing with another member earlier. It all comes down to what the customer wants. If the customer would want air bags i would design a new drop down with a four link setup with DOM and heims as the link bars. But if they want to keep the leafs this def posses a different...

Thank you very much. Could you do me a favor? What is the measurement from center of rear axle (front, rear axle that is) to the fuel tank? or whatever would be in the way of a larger tire? I would like to spread the both axles an equal amount. Thanks kyle

here is a better picture of the holes. The yellow are all new holes i added on extra material, the red are the original holes from factory. You can see how much larger the plate is compared to the original mounting hanger. thanks kyle

None taken what so ever.

little wheeling with the deuce

Jim it was great meeting you and your wife yesterday, you guys are very good people. I'm glad you took the time to come by the shop and see the work i do. I will have the quote done by the end of today on the work we discussed regarding your front rockwell housing. Thanks Kyle

Your not being an ass at all, this is very important info you have brought up. I just finished starting a business with the state of Pennsylvania and already have a meeting with my insurance provider this up coming week to discuss insurance on the parts i build. Now another thing is as of...

lets try that

here is a pic complete. not that close to the drive shaft. I also put locking hubs so it takes the chance of the drive shaft letting lose on the street. Thank you guys very much. If anyone needs anything let me know. I can sell the plate for the ram mount if you like and include the bent...

I did Full hydro, built a alum block for the dash with a brass sleeve Built a cradle for the double ended ram on the housing. I have the rockwell axle contour in autocadd. So i had a plate cut out of 3/8 steel, then bent a piece of 1 5/8 DOM around the outside for support. Also, have...

Thank you, Im running the 16.00 x 20s for tires. As for shocks, nothing right now. But, i plan on running a set of my nitro shocks that i build for offroad trucks/ monster trucks. Prob just run a 12" travel on each corner and i might even run a front sway bar, not sure yet. As for the 8"...

I was hoping to buy another deuce so i could start designing but i can seem to find one local right now for the right price. But i plan on building one if the demand is there. Thanks Kyle

All you need is a welder!!! Ill sell you all the plates to do the job. Yes, the front is the same setup as the rear, all plates are 3/8" except the front panel with "Black Rock Fabrications" on it, that's 1/4". The tube as a cross support is 2" x .120 wall DOM. Below are some pics of the truck...

Nuts were welded on inside prior to welding on final panel. No they are not locking nuts. Reason for not using lock nuts is i knew i was going to re-tap the nuts after all the welding was finished. Re-tapping was a must, due to heat distortion and spark debri in the threads. I plan on using red...

Thank you very much boss doug. here are a few more pics of what i got done this weekend. installation of cross bar going threw 4 3/8 plates on rear hanger installation of cross bar going threw 4 3/8 plates on rear hanger installation of cross bar going threw 4 3/8 plates on rear hanger...

i apologize, i thought on this you had to upload them on a site like photobucket. but now that i see there is no need to, i will use this sites photo upload instead. thanks kyle

http://i39.photobucket.com/albums/e178/BlackRockTrucks/content___media_external_images_media_308.jpg im thinking about selling this as a kit also. so if anyone is interested and wants to give it a test try. PM me and we can work something out. thanks kyle

laterally. im uploading more pics of all the plates laid out. so you can see