Search results

I like all of the comments and I make this design to suit me I am careful not to make a mess when using my set-up . I want to make one out of a 100 pound tank to mount in my truck bed for on the go filtering.

thanks!

Hey np guys, hey can you post a pic of the 100lb tank one??

Yes and air compressor tank would be great I to battled for quite some time with the propane valve I ended up cutting the shroud off that gaurds the valve and using a pipe wrench and on the other tank bashed it with a hammer untill it turned :) where there's a will theeres a way hah. Just make...

I dont mind if you copy it, I posted it on youtube as private so only you guys could see it. I figure i owe it to the steelsoldiers website, ive gotten allot of help here. The filters are the big cost, but I am looking into places like napa im sure they would have some hydraulic filters that...

If i wer going to do that I would go with a third filter add on to a 1 or 2 micron rating and filter 2 times to be safe

what can i say i have always like rammstein :mrgreen:

I agree you may want to use something like a 100lb propane tank or a steel holding tank of some kind. I would not use a plastic tank 10PSI may not seem like much but thats per square inch when you put that over a surface as large as a 120gal tank thats allot! :)

no the epa doesnt know last time they came to the shop i hid my buckets!!! LOLLrofl

Actually no i didnt stage it, I parked it close to the garage to put the new fuel in haha. and ty on the viewing tube. yes it was about 75 outside. also that oil wasnt thinned out or anything either. I will tell you all the oil i use is 5-20 synthetic blend. I work at a ford dealer and that's...

they are old propane tanks :) out dated ones they wont fill. I dont have the part numbers on hand. But you can find everything at tractor supply and lowes. The skys the limit with it you could use a larger tank if you wanted. I am going to up-scale it and mount it on the truck.

limited lifetime. I hope to add one in with a drain soon

yea I know i said it backwards on the video lol I put the valve there to let it feed faster. my mess up on the video.

Oops here is a better link :)

Ok here is the finished product. Ive made some different modifications.. Also the flow has been increased I found out I had a clogged filter!