Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
adjuster
Yes I was referring to the large nuts at the bottom. Is the pin that the snap rings go onto offset to move the shoes out? Also, while looking at the manual I noticed that it mentioned four felt rings that go on the lower studs. Mine does not have any and I suffer from a brake...
Thanks for the tip
Thanks for the tip about the breathers, once you mentioned it I think I remember hearing about it somewhere else. Thanks for all the great pictures as well as the tips on re assembly.
Following up on the most recent posts concerning brake work, have you much experience with...
Question
Thanks again for the very informative pictures and write-up. Do you perchance have a picture of the axle seal and where the axle seal (as opposed to hub seal) actually goes?
Do you fill the differential up to the fill plug? I have a lot of trouble with leaks (even with sealing with...
Thanks
Thanks for the tips. Looking at the TM is helpful but there is no substitute for words of wisdom from a real person. I have had good luck with the boots from Rapco.
Question
I am getting around to doing something similar to what you are doing and I am wondering how hard it is to get the spindle off of the axle pins. Also, I am guessing that there is a retainer plate in the axle housing that keeps the axle in place? Or does the spindle assembly hold it...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!