• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. 2

    Stalled Deuce

    From what I can see in the dark with a flashlight those 2 - 3/4" holes are used for the motor mount on my truck. Maybe your motor mount is different from my truck. Greg
  2. 2

    Stalled Deuce

    I went and ordered the 4309 and 3418. The 4309 is flowing the wrong way to put it in the stock location. Putting it on the engine turns it around and solves the flow direction problem. I don't know if my lines are long enough to reach that location. I'll have to check. Greg
  3. 2

    Stalled Deuce

    I made the mistake of thinking I could find the pinhole in the canister but I can't. I should have marked it before I took it off but I could only see about where it was leaking not exactly where. Thats why I thought I'd go with the setup from Napa. Cut the bracket, and mount it down like Kenny...
  4. 2

    Stalled Deuce

    About the leak, that would make it hard to start. There always was a drip of fuel hanging from the filter. But since the tank pump wasn't working (unknown to me)it only leaked when I stopped the engine. Now it leaks a steady stream. I first thought it was the petcock, but I put a new one in...
  5. 2

    Stalled Deuce

    Thanks Guys for all the advice. The second pump that had the wires corroded off did have continuity so I exchanged it with the original bad one and the truck srarted up with just 10 seconds of rough idling. Moved it off the road, what a relief! With the added pressure I now have a leak. Its a...
  6. 2

    Stalled Deuce

    Devilman, that is good news, thanks. I'm going to check out Napa as soon as they open. I don't believe the pump ever was running as long as I've had this truck. I've put about 4-5K on it. I've never heard or felt anything from that pump. I'm wondering if I fill the fuel tank to the max if the IP...
  7. 2

    Stalled Deuce

    Checked the fuse and its good. My tester I think is bad, bulb may be burnt. Would you be able to feel or hear the pump run if it is working? This is bad luck, drove all day pulling a trailer with about 7 tons of machinery on it and quits 8 feet from home. Make that 10' cause I'm blocking over...
  8. 2

    Stalled Deuce

    I saw that cover but there seems to be no power in the plug that goes to it. I put a tester on it and couldn't get a light with the accessory switch on. If I fill the tank back up do you think the IP will be able to pull fuel to itself cause if the wiring to the fuel pump is bad I'm in trouble...
  9. 2

    Stalled Deuce

    My Deuce is parked on the street in front of my house right now. Just got home and the fuel was very low. I killed the engine and it won't start. Added about 7 gallons and still won't start. Checked the pump on the tank and its not running and it doesn't seen to have any power to it. Is there a...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks