-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Search results
-
Is there a clutch option?
The trick disk/PP may have taken care of the slip, did NOT fix the cause, if a juiced motor caused the slip, then a whole lot of turned up motors would be slipping, the cause WILL show up, hopefully not with breakage -
Is there a clutch option?
there HAS to be a cause besides the disk, others have run 1600s and a juiced motor with NO SLIP, overloaded deuces, loaded deuce dumps don't have slippage, starting out in lower gears then up shifting when rolling, no slip, stall maybe when lugged down to far, but NO SLIP, this SLIP has been a... -
Is there a clutch option?
What about a U shaped clips in the springs to do as gimpy said, I have seen this on some HD pressure plates, a lot easier on the mounting bolts doing the install, once the pp is touqued, compressing the springs and the clips can be pulled out, with the clips in, you can not get full compression... -
Is there a clutch option?
when the flywheel was turned, was there a edge left, the pp would set flat, tight against the fw, but the small edge could keep it up a bit, not allowing the disk total compression, I have seen this happen in machined fws before, sometimes machined for a different pp. It does not take much of a...