Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Any one I can find there are two local yards that if they have them all I have to do is pull them and that's the price. Once every year they both have a sale for transmissions and transfer cases 75.00 a piece. They also have a sale 50 percent of everything in the yard. And they have one all you...
Ok I was just wanting to make Shure I got it all set up and done right. I had a 91 dodge with a nv4500 conversion that was stock and I had the 5th gear issue and it tore up the main shaft and sheared off the transfer case bolts. That was only 160hp with a stock 1997 nv4500. It went on the...
Ok so what's the bolt pattern difference. I've been reading about the different np205 transfer cases. Is one a six bolt and one an 8 bolt? And can't I just get a adapter With the right pattern. So I don't have to have it machined. I don't want to potentially weaken the adapter. I plan on...
I wonder if I can put a dodge input shaft from a dodge np205 in a ford np205 to get the coarser stronger teeth. I already have a dodge np 205 I could take the part off of. Am I worrying to much? Or is that not even possible?
From what I read im more leaning toward the nv4500. According to what I read on wikapedia and 4bt swap the ford version has problems.
1 has an oil cooler
2 has oil pump
3 has 2 and 3the shift problem pops out of those gears
4 shifts hard like stirring asphalt in a bucket
5 shift forks bend
6...
Does the ford zf6 mate up to a good gear driven transfer case something like the np205. Except that goes off the drivers side instead of the passenger side.
In all reality. I will probably not go any higher than 300 hp if I go that far. This is not a pipe dream. I have the vehicle and the motor already the drive train has all heavy duty hubs and axle shafts all I need is a transmission and the components to make it work. I plan on getting this done...
I read some articles on line that since they have started using the g56 there have been many problems and isn't it also aluminum? I've seen many broken ones for sale on line.
To oddave I thought the g56 could not handle the power at least from what I read. Whichever transmission I choose it will be custom built to handle more hp and torque than it will have. To doghead I don't plan to turn the motor up to 800 hp but its nice to know its possible. I will be turning...
Drgreg I am actually valuing your opinion of using a nv 4500. Just not your opinion of a 3.9 belonging in a half ton truck especially considering its it a truck bigger than a f600 dump truck. I am leaning toward a custom built nv 4500 . only because it has been around longer than the six...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!