Search results

We will find out tomorrow if that fhas worked. The Undersheriff took it home over the weekend to see what happens.

Thanks again for all your help. Hopefully everything will work now.

Well, I just heard from a rep at C.E. Niehoff. He said my two regulators are interchangable!! So I will give it a try this afternoon and hopefully that will fix my problem.

I have a call into the manufacurer on this right now. I should know in the morning.

They are both C.E. Niehoff. The bad one is a 76761-n3117 and the other is a 76761-n3117 and it is on the 100 amp generator.

They look the same just a different part number. The only thing on the M1113 that is not on the others is the hydralic winch. Could I swap out generators? Will the pulleys swap out?

Will a voltage regulator from a 100 amp generator work on a 200 amp generator? Please say yes, please?:roll:

You have been a great deal of help on this one!! So now I need to find a new regulator. Once again, thank you. Hugh

It looks like the tag is "2". In the pictures it is the one that I have taken the boot off of. Thanks.

Dang it, I just took it back to the office.:cry: I can tell you it was the front, single wire held in place with a 1/2 inch nut. I can look at it tomorrow and give you the number. As far as amps or milliamps it registered on the multimeter when I had it on the 20M setting and the 200M setting...

Okay, I used the multimeter and put it between the front battery and the cable. -12.68 is my reading. I disconnected the wire on the front of my voltage regulator. Reading is 0.00. So is this my draw? Can I buy those as a seperate piece? I sure hope I have found this.

Is a current meter a multimeter? I am an accountant so I can do a tax return for the darn thing. :) Could I replace the voltage regulator if it is drawing a current? Are they expensive?

Can you test for a bad diode? I had to get another hmmwv today and use the slave cable on it. :cry:

Thanks guys, I will keep you posted.

It seems to only drain on the 12 volt side. aua

It does have the 4L80E. What TM has the wiring diagram on the M1113? I can't find it?

I am still have problems with the bateries draining in the M1113. What would the "yellow" wires be for? Could that be the problem?