Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Okay here's a couple of photos of the lunette. It doesn't look like its welded
it just looks like I'll need the 16# sledge (right):shock:
I'll pick up some spaces and flat washer and attack it this weekend.
Thanks for all you advise and I'll keep all posted with photos when (not If) I
get in...
Haven't had the chance to fight with it again. but will post some photos tonight of the offending lunette (I'm concerned that it might be welded in place, and would like you all to take a look at let some close up photos me know what you think.
Thanks
Jim
PS I got out the 16# BFH just in case...
taking a break from it now.
I tried heat (used a map gas torch) beat on while hot jumped on it with pry bar
next I think I'll hook it to the 3500 dodge and pull it around for while
Got the biggest pry bar I could find about 8' long 2x2 steel bar
It still wont budge, even with my 200# hanging off the end:(
Haven't tried heast yet because I'm in Phoenix AZ area and the though its only
9am the trailer is hot as is the pry bar.
Good Morning;
As the title says the Crown nut came right off with a little gentle tap or 2 with a
mini sledge and very large wrench.
But what does it take now to get the lunette to come out?:shock:
Thanks
Jim