Search results

Idecided to tear down the front end so i can clean things up. I removed the front axle so i could repaint it. next is the rear axle. I am also painting the bumper mounts and the frame with por15. I have done alot of welding to close all the holes in the floor and on the sides. i have pulled...

So far I have stripped it down and I am sandblasting and painting a lot of parts. I have done a lot of bodywork from where the GL forklifts hit it. Pics will be posted tomorrow .

I got the electrical system working the yellow wire was fried.

No it is the one from cucv electric

Please Help....... I can't get my glow plug system working properly. they work but i have to jump the relay. When i turn my key to run the gen 1 gen 2 and 4 wheel drive lights turn on. the wait light doesn't turn on. i have installed a new glow plug relay, glow plug controller card, new...

Hey guys, My fuel gauge is stuck at 1/2 tank and will not move. I have checked all of the connections on my dash. Where is the ground wire that I should check? Do I need to drop the tank to check the ground? Or what else could be the problem? Thank You

I find it funny I was working on the electrical system and found that the glow plug controll card was missing.. Go figure..

Thank you everyone. Today i ran into another small problem. The connector for the lightbulb on the voltage gauge is broken. Where could i find a replacement?

Hi everyone, recently i bought a M1009. This blazer is very solid, no major rust, solid floors and rockers. It has approximately 66,500 on the odometer. I plan on restoring this to make it look like new. I am going to use this as my daily driver once i get my license this summer. To answer your...