Search results

Nice DeWalt stereo in the back-ground. Put on some Pink Floyd, drink a couple beers, and do it.

Follow my recommended re-installation steps in Post #36 step-by-step and you will have no problems. If you do run into some uncertainty, pm me and I will respond as soon as possible.

donalloy1 - when you get your IP back, use your mirror as required and make sure the indexing stud on the pump rotor goes back into the mating slot in the engine gear. Then loosely attach the 3 nuts on the back side of the gear housing to hold the pump in place while you install the 3 bolts...

After reading this thread a few times, it finally occurred to me: The solution would be to use plain old pump diesel with a good diesel additive. Just my 2cents.

donalloy1, I just finished this procedure myself, so here are my observations and suggestions - I will assume you have disconnected both batteries. If not, DO IT NOW. Lay an old blanket over them to prevent accidental arcing. You must be very carefull when removing those 3 bolts behind the...