Search results

Deleted

Thanks Ike, I looked up the different metel problems with diesel. Thanks for the heads up. I think the kit comes with PVC or black iron pickup tube can't tell from the pic. If you have time can I see a pic of your set up. I was thinking about doing away with the drum return line being the aux...

Thanks. No problems. Although a proper M116 trailer would be nice. You can see in the pic where the gen walked over to one side while running. Once I figure out how i will set up my aux fuel system. I may bolt it down center of the trailer again. Or not I don't plan on pulling it around just...

Well heres my little setup. I just ran it on my 30x40ft shop only I have not tried it on my house yet.. I had a 12amp heat gun running and all lights,recepticles,fridge running. load 20%. When my 240v water well kicked on it surged to 50% for a few seconds. I only ran it for 30min. The AC...

Cool. Thanks for the info. Yeah the 002 is a nice smooth sound and the 016D sounds like a jackhammer

These are the battery's I just bought for my Mep002. http://m.oreillyauto.com/mt/www.oreillyauto.com/site/c/detail/SSB0/5172.oap?pt=C0423&ppt=C0005&un_jtt_redirect I have not installed them or tried them.

I hear ya. I would have got a RELIANCE 10 circuit transfer panel switch. But I have a 100amp subpanel running to my shop. The shop panel is running my 240v water well. So I figured I would get a 200amp transfer switch and be done with it. Just have to turn off 2-3 breakers on the house panel...

I just bought this Transfer switch. Its a manual GE transfer switch. Model TC10324R from Home Depot. $330 deliveried. I searched a ton of sites and and this one was the best price and what I was looking for my application. IT

Ok I got it. After searching old threads for hours I fixed the problem. My governor ip arm was sticky. I use PB blaster an kept working the arm up and down till the gov linkage would move it easily. I also tested the charging circuit briefly. The stator appears to be good. 35-40vac on the...

Ok I got my main breaker installed. By the way its the part # from the TM CD3Z1421-1. I picked it up from {PLCCENTER.com} $80 shipped. Not bad :D. They even sent a little bag of candy to snack on while installing it. I also installed the venier speed control cable. I spent 2hrs with...

Well I just ordered a new Circuit breaker. And as far as batterys. It takes 2-12v and most Batts. are a $100 a piece. Im a big fan of Oreillys Super Start. After playing the Walmart game. I love the super start AGM thats what I got in my CUCV. And my 1 year old Duralast just went out for my...

Ike, Thanks. I dont think its really charging. I read 24.8 running and 25.1v dc not running. But on the other problems. Speedmon, Thanks for the tips. The breaker is bad for sure. I was working it on/off and it started to work better. At one point I had continuity ant the L3 but it was staying...

So last night I read the TMs and searched on SS for about 2hrs trying to get more familiar. Any way I started it back up today maintaining around 60-62htz. I checked the voltage going in and everything looks good to me the 120v Rec. plug still works. NO voltage coming out with the breaker ON...

Sorry to hear about the truck. Yeah i just bought that high dollar cable I will sort this out then back to producing power. When i get it going again should i try to flash the field to see if that gives me power

I finished cleaning the fuel tank and fuel system. Installed new oil filter and oil. Good news- got it running and it starts right up and runs strong Bad news- I broke what looks to be a brand new throttle cable. I had to fix the fuel pump by following instuction from this thread...

Well just went and picked up my new Mep-002. This is my 1st Mep002a. The pick up from GL went great then I brought it home and transfer it from my truck to my M101A2 trailer. Heres a few pics. It looks great. So for I started cleaning the fuel tank out the will clean the rest of the fuel...