Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I must have went right by it !! :doh:
Great pictures guys.
Well I got the peripherals removed tonight on the right
Gonna pull the remaining plugs over the next day
or so
Bert did you use a ball peen on those?
Thanks for the picture a Bill
I'm only seeing 6 in the pictures
I know there's one behind the plate under the water
pump near the timing chain cover and I thought
For sure there was another just above where
The tranny bolts up. I'm not sure why I thought
there were so many
Warren I had a cap...
Going to attempt to remove the peripheral items and
Fender in the next day or so and remove the 4 plugs I can
see and replace them with another five new ones.
On drivers side. Now I know where those are also one in the
back that I can't get to because of firewall and the one
behind or below the...
thanks for all the replies.
I should've mentioned they are the disc type
so they seat against a ridge in the block.
Tanner mentioned something about the "dome" side
facing in.
Also the napa guys said the same "dome" faces water jacket.
now I am really confused....
TM1840a does not show the...
Ok so if I am reading correctly
They should be flat if installed correctly not
Remain slightly convex?
If so they were installed wrong
I knew the originals were perfectly flat
Ok so finally after getting the motor completed and installed
After running her in etc
I took it on the road after a 1/2 hr run in driveway.
All appeared fine so off we went
After a mile and a half she over heats....
Open the hood and a core plug ( some people call it a
"freeze plug" ) had...