• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. 1

    M35A3- Changed transmission fluid now won't move?

    WOW! So the torn O-Ring did it! I must have had the up-pipe cocked just slightly so it didn't seal enough to draw the fluid up. I'm relieved and my truck is happy again. Thanks for all your input! I've always been hesitant to go too far with transmission work as I'm not familiar with them. I...
  2. 1

    M35A3- Changed transmission fluid now won't move?

    Thanks for the reply! so I completely disconnected the linkage on the driver's side this time, including the bracketry for the sensor connectors, and "flipped" the linkage and that helped a lot! I also believe I found the culprit- a torn O-Ring at the top of the pickup tube!!! I must have rocked...
  3. 1

    M35A3- Changed transmission fluid now won't move?

    Thanks for the info, Gary! I'm in the process of messing with it again today. I pulled the external filter up near the front bumper and it was less an 1/4 full of fluid, giving me the idea that the transmission isn't pumping, so going back to the thought that the filter installation might be the...
  4. 1

    M35A3- Changed transmission fluid now won't move?

    Thanks for all the feedback on my issue! I messaged that past owner this morning, and found he drained and filled the transmission with Napa https://www.napaonline.com/en/p/NHF85405 Hydraulic Fluid, which has been discussed on here as being an acceptable fluid to use. Now I'm thinking the...
  5. 1

    M35A3- Changed transmission fluid now won't move?

    So much truth to that! I'm thinking I might have knocked the filter off the pickup tube or something... I'll dig into this further.
  6. 1

    M35A3- Changed transmission fluid now won't move?

    I regret not inspecting the old fluid more closely. The transmission seemed fine before I drained it so I didn't give the fluid the attention I should have. The pan had limited grayish/black residue/ sludge on the bottom after I removed it, but really no metal flakes on either the pan magnet or...
  7. 1

    M35A3- Changed transmission fluid now won't move?

    Thanks for the reply! Fingers crossed it won't need a transmission as it hasn't been run long. It was a red fluid that came out, I assume ATF was in it already, but have also heard they sometimes would dye oil red to help locate leaks? I assumed it was ATF that I drained at the time... It hasn't...
  8. 1

    M35A3- Changed transmission fluid now won't move?

    Good evening! I'm not at all knowledgeable when it comes to transmissions. I changed the internal and external filters in the Allison transmission and drained and refilled with Castrol TranSynd. I measured 3.5 gallons of fluid that I drained out after dropping the pan and external filter and...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks