Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
You can use the cell phone to initiate the sequence. You just need a more robust controller between with safe fail modes.
In my example, using the counter with alarm output to stop the start signal has a risk. If the mag pickup fails the counter will never see engine speed and the crank cycle...
You might be able to use a digital panel meter with alarm output to sense engine speed. A magnetic pick-up off the ring gear is the most common source. Once speed setpoint is exceeded the alarm output opens a relay which can be used to break the start signal.
There are less expensive options...
All of our industrial engines have a crank terminate speed. 300 RPM or so with idle set at 600. The starter can roll the engine at 200-250 rpm. Once the engine reaches 300 that indicates that it has overrun the starter. This sequence gives very good starter life with pre-engage type starters...