Search results

If the ID tag with ratio is not bolted to the diff with a cover bolt you can remove the cover the ring gear should have numbers stamped in it which will tell you the amount of teeth on the ring and the pinion gear. If not count the teeth of each gear and divide the amount of pinion gear teeth...

most of the time there will be numbers stamped into the ring rear which is easy to see with the cover off when rotated in the correct viewing area its an AMC 20 mine had them just unbolt the cover no need to remove the diff itself rotate it look for numbers example 41 10 you divide the small...

I still have a good diff I think its the 2.56 or whatever was numerally lower I can sell to you if you have the same ratio I see you have a 703 number so you are not far from me I sold the vehicle the issue I had was hard to explain I felt the driveline binding and it whined more than expected...

Thank you I have never seen anything come from a manufacture with mismatched ratios. What symptoms did they have and when were they able to create them? I had no idea the ratios were different since it drives smoothly I am considering installing ARB lockers so I guess I can just change the...

I have a 1986 M998 that was overhauled in 2007 in ME. I noticed on the diff cover tags that the rear is stamped 2.56 and the front is stamped 2.73. I was going to pull the covers today with the vehicle on a lift until I discovered the brake caliper mounting bracket is blocking access to one or...