Search results

Also pay particular attention as to where the hook end of the Governor mechanism spring is attached (you can see it with the close to run cover lifted as it sits to the right of the arm going into the Fan Shroud area to the adjusting mechanism worm gear/star adjuster. The hook end should be...

Here is the page for the MEP-003a manuals you want, in the -34 manual its on PDF pg 105 section 7-3 b.c.3 Edit: Also go to above PDF pg 107 and refer to the diagram, in particular item # 16 for adjustment per the procedure.

I took the liberty of cut-n-pasting your cross-posting from you later thread posted today 7/22/2020. This is so we can provide addition help in your original thread. Anyway, what you are describing from your description as "surging" may be "hunting" of the governor. Go to the Technical...

Go to this Help thread and post what you are doing to "download the video" and see if someone can help or walk you through the procedure. Edit: Clarification that "Website help forum" suggestion is for obtaining help with the issue related to your posting/downloading the above video error...

If you could post of video from startup to surging it might provide some clues that someone might pick up on as to what the nature of the problem is. It would be good if you could temporarily open the "close to run" shroud that covers the fuel shutoff solenoid to show its movement while running...

When I use seafoam I like to put a can in the generator's day tank, not Auxilliary tank if using one, and run it in the evening under a load for about an hour (this allows the Seafoam to mix and get distributed through to the ck valve, IP, injectors, pistons/rings, etc. and then I shut it down...