-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Search results
-
E
Another way to lower an M1101/M1102
- parking brakes the etrailer brakes came with the parking brake lever so I just ordered new cables that fit from another place that made brake cables. - i left the components in place. Some people remove them which is another option. - I fit wheel hub adapters you can order any wheel... -
E
Another way to lower an M1101/M1102
No problems with submersion, you need to remember they use these same ones on boat trailers. You just dry the disks out using the manual button on the brake controller. When I did mine I also swapped out to match my Land Cruiser Wheels and tires. -
E
Another way to lower an M1101/M1102
Not that I know of ... However you can call these guys and for a lot less $$ than replacing hubs just install some wheel adapters. https://wheeladaptersusa.com/ -
E
Another way to lower an M1101/M1102
M1101 with the dexter electric brake swap on my Land Cruiser. Next is lower the 2.5" .. and likely push the axel back 1/2" and remount the shock back 1" -
E
Another way to lower an M1101/M1102
I found the cables for the dexter 12" x 2" drums ... there was a thread on Expedition Vehicles and those guys were converting them into expedition campers. Got the cables from thepartshouseinc.com the make the dexter cables. Just FYI -
E
Another way to lower an M1101/M1102
I think I need some parts that look similar to this? Does any know where I would get them? -
E
Another way to lower an M1101/M1102
I doing a hub swap and used the eTrailer electric Brakes with manual parking brake. BUT it looks like I am missing some parts to attach the manual brake cable to the back of the Dexter 2" x 12" brake syste. Does any one know what parts I need to attach the M1101 bake cable to the back of the... -
E
Another way to lower an M1101/M1102
Thanks. Tabs I can do. I'm staying with the pintle for the articulation. -
E
Another way to lower an M1101/M1102
Thanks, I am wondering how to hold the pindel so it doesn't slide in and out as it did with the surge brakes. If I just delete the parts it's going to clank back and forth unless It is bolted in place somehow, what have others done for that? -
E
Another way to lower an M1101/M1102
I'm about to lower my M1101 the 2.5" using the square tube, and do the hub swap like TexasTT did back on page 3. With the hub swap it will be using electric brakes and the same wheels as my Land Cruiser. What should I do about the surge brake setup and parts?