Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
It doesn’t add a lot dyno wise, but it’s enough to melt a max loaded truck down with an operator who doesn’t know how to drive it, the aftercooler is a JOKE by not only being restrictive but barely removing heat from the air charge and often adding heat in cooler weather to the charge.
If you...
So there’s 2 screws top and bottom of that cap that i removed, then under it was simply 2 jam nuts there, I used a large 3/8 drive socket on the big nut held socket with channel locks, then used a 1/4 socket with extension I had inside the 3/8 drive socket and loosened it, then backed the small...
Can you take a picture of said tamper screw? I didn’t have anything tamper proof on my unmolested 8.3 so I’m curious
Sent from my iPhone using Tapatalk
Under the Allen head is strictly “Low-Boost fueling” meaning it adds fuel before boost comes on, but doesn’t alter the end power of the engine. You have a Bosch MW pump most likely, and the main fuel is located on the rear of the pump with a jam nut. You’ll want to give it a little low boost...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!