Search results

So here's the pump with the fittings attached before installation into the MEP-803A. Just needs a bushing on the input side to neck down from 1/4" NPT to 1/8" NPT and the connector soldered into place on the leads.

So I found the Carter P70416 pump that is the replacement for the E1074 unit on an auction site and have managed to assemble it with a bunch of fittings to reinstall into my 803A. She rumbled to life on the first try, after preheating and priming. I'll add photos in a bit to show my completed...

And the E1074 is now a Carter P74016. Found some on that auction site and other places as well. Remember, one is none, two is one, three is two, and four is just right.

So I just metered power at the Primary Pump, which is an E1074 unit, and have confirmed power at that connector Seems like I need to purchase an E1074 pump. Best source for these?

Gents-- My MEP-803A cranks but will not start. 98 hours total, plenty of good fuel. When I turn the switch to Prime/Aux, I hear a pump running, but when I turn the switch to Prime/Run on the way to Start, there's no pump running. Suggestions please. Thanks!