Search results

All the hub kits I have they all had Loctite in the box so one would think that's what the bolts call for. If you tap on the cross with the hub still on then both should come off as one. After you clean the cross don't forget to put a little grease on the hub shim and thrust bearing so they stay...

A light tap with a brass hammer and the cover will come off. Sometimes by it's self sometimes the whole cross and gears come with it. If the cross/gears stays in the spindle should stop it from falling to the ground. If the gears/cross drop out to no worries they don't fall apart. If your is...

The hub was off when I did that and replaced with new plug.

Yea I should have fix the plug. I took some duck tape and covered half the hub hole and filled it up and let it drain into the housing. Took forever. When I went to drill out the plug the bit stopped when it hit the magnet. I had a good centered drill hole so when the drill bit hit magnet I took...

Yes you could but it will take a long time if it's empty.