• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. Floridianson

    Front hub spindle nut tool

    My hubs were so tight with the new seals seating it on spindle so yes I took mine to the 50 foot pounds to seat.
  2. Floridianson

    Front hub spindle nut tool

    The TM calls for 50 foot pounds then back off 1/4 turn. Then 10 to 20 foot pounds and see if the inner gear plate lines up with the pin. If not do not tighten but you can back off one spline. I took all of mine to 20 and had one line up perfect the rest had to adjust a tad.
  3. Floridianson

    Front hub spindle nut tool

    I would assume so and yes it needs to be the seven inch to reach in over the long spindle. Yea seen where OP's just added more length to a standard 1913.
  4. Floridianson

    Front hub spindle nut tool

    OTC 1913GOV. 3 and 7/8 inch 8 point, seven inches deep 3/4 drive.https://dpequip.net/shop/other/5120-01-567-9296-3-7-8-socket-navistar-3114485c1-otc-1913gov-spx-521687/
108,422members
163,717threads
2,303,414posts
910online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks