Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
22-25 psi easily, 30-32 psi if I really push it. When you start turning it up, at a point it a 1/4 turn makes a lot of difference, and changes the heat and boost settings a lot
Yes I've been turning up the fuel in it. I had turned the fuel up slightly before the guage install and it was topping out at 1050*f. Now I've about got it where I want it and it's maxing at a little over 1200*f and has lots better power and smoke.
The guages work well but I wish I had just bought 2 of the Auberins guages as I've found I read the numbers faster than the guage. The EGT guage I removed the turbo to aid in cleaning after the drilling and tapping. The boost sensor, I removed the pipe to aid in install.
The lights I bought...
I just installed some new guages and lights. The guages I bought off Amazon and we're 12 volt. I decided to install a 12 and 24 volt fuse panel were the CTIS valve used to be to make all my wiring easier. I used the CTIS switched power to trigger a relay so I had 12 volts switched on when in...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!