Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I would imagine you are right. But having seen it go wrong several times here in Germany, I just had to bring it out. I THINK, that the soldered splices that melted (and yes, started fires), were all in barns, and I do not think done by someone who had graduated from electricians school. AND, it...
At the risk of getting whooped over the head again, I will say that indeed, if you have the time to tin the ends before crimping, it about the best way to repair a wire without replacing it. I also learned in AIT, 1972, to use one of several types of splices, to join the wire ends before...
There is a time and place for solder. I still have my soldering iron that I bought 30+ years ago. It still get used a bunch. When a circuit is low volt/amperage, then I don't think twice. Or when I have problems with a circuit card/board. Re-solder every connection, and often it is as good as new.
The only thing wrong with a soldered wire is that if you ever have the wire get HOT, like a short circuit, or an over loaded circuit, it can melt the solder and come apart. That's the reason you don't solder wires in a house installation. An overloaded circuit makes heat. You have all seen wires...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!