Search results

So I was playing around with the bolt for the cargo bed seats and I found out the correct size for the seat to bed side is 3/8 of an inch. I bought a few pins with the retainer and so now I can take the seats off without tools. Of course, if you need room in the bed, you can fold up the seats to...

M813rc, "Not trying to be a know-it-all, but offering some constructive advice - the tarp actually goes the other way around on the truck. The triangular flaps should fold from the front around onto the sides, and the side ones around to the back. This will keep the wind from inflating your...

I installed the seats but the pins used to attached the seats to the bed sides were missing. I used 1/4 inch bolts instead and they work but it would be better to use 5/16 bolts. Of course, use lock nuts so the bolts don't rattle out.

I have the regular bed. There are 4 staves per bed side and there are 2 sides on each side. So that is 8 and there is one more in the corner up by the cab end of the bed. So you could put 9 sets of staves in if you wanted to. I think two of the sets are very close and you don't need to double up...

Blhar15, you are correct but maybe we should say you need AT LEAST 7 sets. I see that the bed sides have places for 9 sets and the storage rack behind the cab has places for 8 sets.

I was checking the size of the 5 ton cargo bed and the 7 ton cargo bed and they seemed the same. So I thought, I wonder if the cargo cover, bows, and staves would fit on the MK23? So I purchased everything for a 5 ton and installed on my MTVR. And it all worked.