• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Kenneth Cole

    New alternator but still problem.

    Hi everyone I lucked out. I did have the wiring wrong from the regulator to the alternator. I corrected it and I am now running in the green. I want to thank everyone for your help. If it wasn't for this forum I would be at a loss several times. Thanks again Ken
  2. Kenneth Cole

    New alternator but still problem.

    Hi I pulled the voltage regulator off. There are 4 spade connectors on this regulator and just three wires from the alternator. I may have installed them to the wrong locations. Is there something showing where these should be connected? I may have to get another regulator. You think I would...
  3. Kenneth Cole

    New alternator but still problem.

    Hi OK, I adjusted the screw on the voltage regulator and it made no difference in the voltage. I have 24 volts going to the regulator and I am reading 24 volts on the alternator. Could you tell me what the small ring terminal wire on the alternator is for and if it should have any voltage...
  4. Kenneth Cole

    New alternator but still problem.

    Hi Gentlemen, I made a mistake in the title. I replaced the voltage regulator not the alternator. I have a 60 amp unit. I will check out the 5a wire. Also I did not adjust the screw. Is this to adjust the voltage output? Ken
  5. Kenneth Cole

    New alternator but still problem.

    HI Replaced the voltage regulator and brushes but still in the yellow. Measured voltage at the voltage regulator with her running and measured 24 volts. Question? Am I reading just the battery voltage at this point? Is there a way I can measure just the alternator output? Other ideas? Ken
Top