Search results

Some prices on gallons all from Wally world: Wally world 2 stroke $12.83/128 = .100 per gallon Pennzoil Premium $17.86/128 = .139 per gallon Opti-lube XPD $70.15/512 = .137 per gallon Opti-lube XL $56.16/1280 = .044 per gallon In my opinion two stoke oil adds lubrication the...

Glad you got it running again! I've used a vacuum pump to bleed most of the lines in the past pulling fuel all the way to the injection pump. Then crack the injector lines to get fuel to them and it should start easily then.

Take a mirror with you to look in the back side where the pump goes in to help line up the dowel pin. Don't install anything till all bolts are started into threads cleanly. Intake last...

Which three bolts are you referencing?

That green stuff is brutal... rolock scotch-bright best method to remove it. I need to get out to see you! I have a few things I'm hoping I can source from you.

This end is under the cover, inside the bench...

No, they are 3/8, 5/16, and 1/4'. Somewhere there is a thread with approximate lengths but I can't find it. If you bought 3' of each you should have extra for spares if I remember correctly, so not a big expense. I found this finally: Fuel Lines If you're replacing rubber lines, don't forget...

Some thoughts.... It doesn't sound like you hooked up the drain line properly to feed the fuel system. You would need to run a hose from the drain line on the drivers side to metal line on the passenger side (bottom metal line on the left in second pic) which is under a cover and then bleed the...

Yes you have to remove a little of the plate to get a socket on that bolt. If you have a die grinder with a whiz wheel it can be done quickly. I believe it is unique to the M1010 only. I had to do it on both sides as I replaced the original tank and added one on the passenger side.