Search results

I happened to have the reamer as I was also replacing the pins that hold the leaf springs to the frame. Made new pins 0.010 oversize and reamed out the worn bushings.

The groove helps the grease get around the pin of course. I changed these also and the new ones did not have the grooves same as yours. I ended up getting an expansion reamer and opening them up just a bit. There is a spec in the TM. After pressing them in the ID shrinks some. I did not cut...

If you have trouble getting the seals out you can try another method. I cut up a heavy piece of wood to go across the face of the housing and made a piece of steel I could slip into the seal. Then with a threaded rod, two nuts, and some big washers I was able to jack them out all controlled like.