Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Well it didnt get to a TCM swap i don't know what i did wrong when i checked the light, but when this first started i order a relay and a trans light, they got here last night, before trying a TCM swap i replaced both and the light is out, so i swapped out the relay with the old one and the...
Ok the 1097a2 is a 95 and the 1045a2 is a 05 so if i swap out the entire box and still get light we can rule out TCM and the light did same dim i also checked the light itself fed it steady 12 right off battery and checked for continuity in case the light itself was messed up.
I got two brand new batteries I know they are good and I swapped out the light,
Could I swap a TCM from a 1097a2 to this truck to rule it out both have non-turbo 6.5 4speed transmission?
Ok so as far as continuity it's no, yes, no
And voltage on 657a is 0 off .018 at run and 10.17 engine running
No crimped wires or anything and plug to tcm looks good
I also tested voltage off of 657b and I got 0 then 12 on run and running I'm getting 11 volts
Yes I unplugged it inspected the pins everything looks great, i don't know if another TCM would be the solution, only bc the one that is in it looks brand new. i just got done with the reverse switch. I went over all the wiring took the light out tested for bad grounds and everything looks...
Tomorrow I will be installing the reverse switch so I'll be in the neighbor hood and I'll look at all the wiring for the light hopefully it's that, possible a bad ground.
I was able to get it out and took the risk I got it up to 50 now I fist went through 1 to 2 to d to OD all went great no problems at all reached all four gears in OD and felt torque conveyer lock up
I checked the red button it's not popped meaning pressing it did nothing, no movement, as for...
I have an m1045A2 (planetgov) and ever since I got it the trans light stays on. The light comes on as soon as I turn power on crank it up, until I turn the truck off. I used the diagnostic approach, jumped A and E, this is where it gets really frustrating it just flashes 12 over and over, no...