• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Overdrive

    MEP-903 Generator In S-805 Electronic Repair Shelter - Road To Startup

    Pic of the battery setup and harness to the shelter. Going to figure out a mount on the back of the trailer for a permanent install.
  2. Overdrive

    MEP-903 Generator In S-805 Electronic Repair Shelter - Road To Startup

    Guess I better put up some pics or it didn’t happen... It’s kind of funny firing up the generator inside the shelter because the startup procedure using the APU has no power inside so have to use a flashlight to see the control box. Going to fix that with some DC lighting off batteries...
  3. Overdrive

    MEP-903 Generator In S-805 Electronic Repair Shelter - Road To Startup

    Overdue Update: Took a break from the 805 and 903 project i was getting too frustrated but recently starting working on the 903B again. I have been using the shelter itself as a HAM radio and general hang out spot in my workshop since i brought it home. MEP-903B Update (Over speed light)...
  4. Overdrive

    MEP-903 Generator In S-805 Electronic Repair Shelter - Road To Startup

    UPDATE: Finally was able to get the gen up and running. Unfortunately, as surplus projects go, I had a few issues and a few still to fix. Cleaned up the get set, changed the oil and filter, replaced all the soft fuel lines. Checked the radiator for coolant and didn't see any so went to top it...
  5. Overdrive

    MEP-903 Generator In S-805 Electronic Repair Shelter - Road To Startup

    Cleaning would seem like a good place to start. Thinking careful compressed air and sponge bath with simple green rather than a garden hose wash? Easy to get all of the gen since it’s on a rack 2’ in the air. Ordered fuel, oil, and air filters but fuel hoses are long and rotted so figured I...
  6. Overdrive

    MEP-903 Generator In S-805 Electronic Repair Shelter - Road To Startup

    Power input panel Inverter under Power Input Panel and the 240V shore power cable hooked up Control Panel
  7. Overdrive

    MEP-903 Generator In S-805 Electronic Repair Shelter - Road To Startup

    Pics... Um.... It looks like this thing has been sitting for a LONG TIME... 36 hours on the control panel may be accurate? Fuel filter looks scary
  8. Overdrive

    MEP-903 Generator In S-805 Electronic Repair Shelter - Road To Startup

    Guyfang, I have TM 9-6115-670-14&P for the gen. Covers all three models, A, B, & C.
  9. Overdrive

    MEP-903 Generator In S-805 Electronic Repair Shelter - Road To Startup

    Yea won it at Polk. That was a FREAKY drive down from St. Louis. LOL on the "mysterious" nature of the gen. I guess we will be unmasking that mystery shortly.
  10. Overdrive

    MEP-903 Generator In S-805 Electronic Repair Shelter - Road To Startup

    Just brought home an S-805 shelter with ALL the MEP-903 generator components in tact. I wanted to use this post to document the checkout and startup (attempt) of the generator since there is very little info/discussion on the MEP-903 generators. Generator Setup in The Shelter: Generator...
Top