Search results

I found a number for the Fleetguard adapter 3300923S but it is no longer available.

I will get this truck started now and let it warm up and try my pressure check again.

Hi I checked with Fleetguard and they don't have any part or kit with that number on it.

Thanks By the data tag I have the NHC250. Phil P

Hi FER: M929 I have a question. Someone told me there was a kit to replace the fuel filter with a “spin on” fuel filter. Can any one give me a part number and source for this. Thanks Phil P

Hello All Now I have a new problem again. This truck will start cold and run until it reaches normal temperatures then it shuts off. It will start back up but requires some more cranking time than normal but will run again for about 10 min and do it again. I have pressure tested the system...

Thank you Fuzzytoaster That is just the answer to all parts questions. It must have taken hours of time to put that together. Phil P

The model we have is at the top of the third page. Phil P

Thanks for that but I have the parts book and came up with the same number. However so far neither NAPA nor Advance has been able to cross reference those numbers. I haven’t tried O’Reilly auto parts yet. I ran out of time yesterday so will try them tomorrow. I found a company on the...

Hi Thanks I forgot about that. It is a Cummings 250 no turbo. Here is the picture I have of the data tag. Note the date of manufacturer 4-84. If practical I would like to obtain the part numbers of all the belts in Napa or CARQUEST part numbers or any of the common belt manufacturers. Phil P

Hello all I am back with a new problem. The truck has been doing quite well even if it does get stuck a lot. The power steering belts failed and the pieces went thru the fan drive belts so I need to change all 4 belts. Can someone give me the part number for these belts? 2 power steering...

Hi Here is the latest video. It turns out I was given the wrong spec for adjusting the injectors. After doing the injector adjustment again using the spec for the older injectors it now runes quite well. I would guess I was getting the injection about 10 degrees past TDC. Phil P

Hi I finally have a little more information. The truck never ran well and they finally brought it into the shop under its own power but when shutdown never ran again unit today. I have determined the engine to have been manufacture in 1984. It would crank and sound like it was going to run...

fasttruck If I had that plate life would be much easier. LOL Thanks for the service advice it has a winch that the previous owner has disconnected the controls to. This truck will get more severe service than the military could ever give it short of blowing it up with artillery. I am sure...

Hello Well we have run into a fuel system problem. It looks like the truck sat for a very long time with a little fuel it and that has turned to a gooey brown substance that is pretty easy to clean with Xylol. It looks like it didn’t make it to the injection pump. I need a fuel filter can...

Thanks

New question I don't find any TM's listed for the M925 or the M924? Phil P

New to 5 ton what is the model of this one They purchased this one and didn’t get an ID plater. I know nothing about the 5 ton trucks. This has the Cummins engine and auto transmission. I will attempt to post some pictures. Phil P