Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
To clarify, I stated "my injectors were perfect",I didn't mean the tips had No crud on them, just not very much comparatively.
The pop off pressures (3,500 psi) and functions were fine.
I get clean synthetic oil (about 10 gal per mo) from a generator guy, it just shows up on my door step in gal jugs!
This oil looks new and clean enough to dump right in!
This has always been the speculation.
It seems that "IF" the increased ash in the wmo causes increased engine wear, it would be to the cylinder walls, rings, valve guides,hydraulic head plunger and mating surfaces, and injector tip internal machined plunger surfaces.
On the other hand, any of...
Had been geting around 7 miles per gallon pulling the trailer, not sure about around town.
I just installed an lds IP, that increased performance but haven't had the chance to check fuel economy.
I've been driving my deuce tractor for 3 years (about 15,000 miles) on wmo mix and sometimes high concentrates of clean synthetic wmo, everything pre filtered to 3 microns.
When we pulled the heads at the Ga Rally this year for the head gasket job, the combination chambers looked simular to...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!