Search results

PM sent about looking at your injectors. Before sending them, have you checked your IP or at least verified you are getting fuel to the injectors? If the machine has been sitting a long time there is a good chance the plunger guide in the IP may be broken. Give us the history on this machine and...

Although it's a little late now , but did you ever get to try bleeding the injectors by cracking the injector lines and cranking the engine? This would have also answered Guy's question above as well. Still no harm if you already pulled and sent the injectors since 9/10 times they at least need...

Sure, not problem. Send me a PM and I will give you my address to ship them to. I will check them out.

Yes, that is the older PSU pump which doesn't use a plunger guide. ( it uses a drive pin with no safety feature ) If you are getting a little fuel out of the pump you most likely have a working pump. First try bleeding the lines up at the injectors, while cranking the motor. If that doesn't at...

So I assume you aren't getting any smoke or anything correct? Do you have the throttle cable pulled out to the normal run position as it was back when it was working? Have you checked visually to see that the throttle linkage at the pump goes to the full UP position when you crank it and the...