• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. Retiredwarhorses

    EESS PCB replacement for the HMMWV ?

    TSU’s are backwards compatible for any version of EESS. The TSU will say “temperature sending unit” on the device itself
  2. Retiredwarhorses

    EESS PCB replacement for the HMMWV ?

    Ahh, sorry, website is still under construction...my inventory changes constantly, so Best is to call the shop or PM me here. i have no boxes right now...they are getting difficult to get as Nartron and KDS went to battle, seems Nartron won out and all new boxes will be Nartron only, and they...
  3. Retiredwarhorses

    EESS PCB replacement for the HMMWV ?

    Who’s website?
  4. Retiredwarhorses

    EESS PCB replacement for the HMMWV ?

    A GPC and a TSU are completely different parts, a GPC in a truck with an S3 will get a flashing wait lamp, and that's it, the glowplugs don't energize....but then again, I've never metered them in this scenario. The flashing wait lamp is fault because the box doesn't see the TSU.
  5. Retiredwarhorses

    EESS PCB replacement for the HMMWV ?

    why the Guvment didn't install a manual switch on the box is beyond me...only makes sense. i have opened the new Nartron and KDS S3 boxes, I have found the Nartron still retains its relays and the KDS unit is for the most part all IC. I may have the 2 MFG's backwards, but they are most definetly...
  6. Retiredwarhorses

    EESS PCB replacement for the HMMWV ?

    If the EESS is full of water, I doubt it had anything to do with that rain you were in...it was probably already there from sitting in storage...there is a foam donut that is supposed to be used on the EESS boxes, it goes on the top plug between the box and the body, this donuts prevents water...
  7. Retiredwarhorses

    EESS PCB replacement for the HMMWV ?

    IMO, If the starter were bad, the wait light would function normally. Have you tried to jump the starter with a jumper? pos stud to small tab on the solenoid. you need to be more clear on this clicking...clicking to me sounds like dead batteries. If it were a bad neutral start switch, you would...
  8. Retiredwarhorses

    EESS PCB replacement for the HMMWV ?

    There is still a problem of people using the term PCB and GPC and EESS is the same posts...I will say it once more.. The PCB and GPC is the old problem ridden box. If you have an EESS, no matter who makes it, you MUST replace the old GPC with a TSU "temp sender unit" read my post I put up...
  9. Retiredwarhorses

    EESS PCB replacement for the HMMWV ?

    its sitting on my shelf....
  10. Retiredwarhorses

    EESS PCB replacement for the HMMWV ?

    and neither do We. you need to post a pic of your box. As far as what you need if it goes out? Again...I have no idea...need to know what you have. But here it is in a nut shell. IF you have a KDS yellow label box with a yellow banded TSU, most likely both KDS labeled and the Box is a...
  11. Retiredwarhorses

    EESS PCB replacement for the HMMWV ?

    KDS and Nartron...S3 EESS is the smart start, they are green.
  12. Retiredwarhorses

    EESS PCB replacement for the HMMWV ?

    I have S3 EESS boxes with new temp senders for $350.00 the boxes are used takeouts that have been tested...I know, cuz I tested them. I have new in the box for 600.00
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks