Search results

if someone finds those drawing helpful, here are two DXF files, one for the original adapter and the 2nd adding the 300 holes: However I never made anything out of them, and no guaranty for accuracy. I used Fusion360 for the drawing and am happy to share the *.f3d files too if there is interest.

Update (sorry for the delay) I ended up deciding for the original M180 and abandon the E300 conversion. The M180 engine I got had most of the missing parts I needed and is now in place. Some of the cooling hoses I had to make. The current state is the Unimog has a running engine - but have not...

am back on the project. Had to get the F300 rebuild and it's almost done. Good for a try-fit of the adapter plate to check on the hole pattern and the cutout location for the starter. And found out that the hole pattern of the flywheel is not quite matching. holes are off by about 1/64". A small...

I did find the Ford 300 holepattern online, seems to match.

I am using the two plates (from Ford engine and from M180 engine) to get the hole pattern into the drawing tool.

Bought the Unimog with lots of engine parts missing and decided to install a Ford 300 Inline 6 instead (happen to have access to one). I have seen some posts of Unimogs with this Ford engine installed and now hope someone would know links or other helpful info. In particular I am looking for the...