-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Search results
-
raise and lower cab
I can take another tomorrow that’s the only one I had on hand -
raise and lower cab
It folds out and goes past straight. If you push on the cab it’s as locked as it gets. If your pivot is stuck then it won’t work right. -
raise and lower cab
I have seen the whole oblong assembly installed backwards. You can see bottom right of the pic the lock arm is fully open. -
raise and lower cab
The arm folds open and locks out. As best as it can for what it is. So if you push on the cab it’s locked open. And to start closing it, takes hyd action to pull the cab and arm back. -
raise and lower cab
The cab brace should fold out and lock when the cab is fully open. I had a truck that was giving me hyd function issues I swapped the control box and all was good. I had planned on taking the bad one apart and see what was going on with it but haven’t gotten to it. -
raise and lower cab
There are 2 filters in the control box on top there are hex head covers that come off and then the filters unscrew and come out. The parts tm shows the breakdown of the control box. There are 2 different styles. Again any water in the system will cause issues like you are having. -
raise and lower cab
You may have to bleed the spare hyd feed. Happens. When you run your pump is it puffing out the breather on the pump? -
raise and lower cab
The cab will usually slowly creep down on its own once you get it started going down. -
raise and lower cab
How does the fluid look? Any water in the system. That will cause those issues.