Search results

I see you placed a wanted ad for a new one. That will be your best bet. I wouldn't think about rebuilding that one and here's why. Not only for the bent spindle, but because the tip of the spindle is a sealing surface for the front cap seal. The tip is chromed and any imperfections will cause it...

What brand and model number is that clutch?

I haven't been into a Horton before. If the shutterstat is NC on your truck I can't imagine the inner workings can be much different than an Evans. They'll probably look different, but operate the same. You need to verify if it's locking up or if it's just bearing drag. I usually roll up a...

We'll be here. Make sure to take pictures though.

In Brasco's second picture, the ring around the hub with the bearing is actually the piston that engages the clutch material. Air comes in behind the piston and pushes it out to engage the clutch. In this picture you can see the piston removed, along with the pins it slides in and out on...

The part number you listed looks like their current or updated part number format. Appears to be about the same as the older ones. Mine is an '84 923A0. The nose piece ran around $80-$85 and the big O-rings were around $15 for the both of them. He had all of those in stock. FWIW, the shutter...

I just rebuilt mine a couple of weeks ago and while I'm not a guru, I did learn a lot and can share some information. That is an Evans FC367E, correct? Comfort Air has all the parts you need to rebuild it. That's the one in Grand Rapids...www.comfortairgr.com. The man that answers knows his...