Search results

If you had a hard time finding it like I did, put the part number in the Amazon search box in this format and you will find it: 2-447-010-025

Thanks--they're worth it especially compared to the "performance" of the original, worn-out, bouncy-balloon-tires that were on it. So much better related to compaction, traction and floatation. I specifically asked for reversal on the front as I road'd it a bit at first. I am finding that I am...

Field Mower on the SEE I couldn't wait to weld up the brackets and hose management, so I put some tarp straps on it to hold the hoses from flopping and mowed the pasture, and it worked even better than I thought it would. It has been rainy in the Puget Sound area lately so it was soft in...

FLU419 Running a Field Mower on the Front The short answer is yes, it can be done. Turns out I just finished with proof of concept yesterday evening--just got the last adapter shipped that allowed me to hook it all up front to back and turn on the PTO to look for leaks and let those big blades...

I am assuming the front PTO on a 406/416 is a hydraulic unit, yes? If so, is it run off the low-flow belt driven pump, or off the rear pump?

Mystery Center Attachment Point Anybody know what this substantial lump found right there in the middle might be? There are plastic caps in each side of the hole, so it was important enough to protect. My guess is that it is either for other 419 attachments or something left over from the...

I got the 32-inch Extreme Weld-On thumb. I haven't seens any reason to go bigger, but then I have not put a lot of hours on it. Works fine for picking up logs and rocks. If I were using it all the time I might go with something fancier like an Amulet hoe clamp or a hydraulic unit.

What the heck is this? Hi All-- Take a look at the driver's-side front of your 419.101; below the grill...there is sort of a framed, half-circle opening with a four-hole bracket below it, between the radiator and frame. Anyone know what the bracket is normally used for? I am thinking of...

Thanks for the welcome. The SEE finally arrived, pulled backward on an RGN. Almost lost the hood because the broker didn't tell the driver to put it in the cab before taking off (that and the latch does not work). It was recapped in 2004, has 46 hours on it and the previous owner put a...

I have thought about how to use their 4-in-1 as well. I thought that control could be accomplished using the V&M Super Add-A-Valve (http://vandminc.com/vmsite/vm/list.html)--I like the idea of the replacement handle with a button on it

4-in-1 Bucket Control with V&M Hydraulic Multipler Valves I was starting to think about how to add a 4-in-1 from Titan--and I was thinking that using the V&M Hydraulic Multipler Valves (http://vandminc.com/vmsite/vm/list.html) might help in controlling the functions. I like the push-button...

...and speaking of tires, I have a chance at some Michelin XM47 tires for my SEE, but the tire man is balking at the 405/70R20 size. I have seen multiple references to folks on the Benzworld forum with this size on the stock 11" wheels on a plain old (such a thing?) 406, and a couple of places...

Hi All-- I am a soon-to-be-new owner looking for wisdom and how-to related to using the rear hydraulics to run a skid steer mower attached via quick-tach to the SEE in place of the bucket . Do any of you have such an arrangement? What did you use for a valve to control flow from the cab? Where...