Search results

I have seen a 1101 on a Bobed Deuce and like it, on a Bobed 5-ton I think some small fender flairs would make it look about right. you would want to leave the spare tire in place and put it behind that. on a 6x6 you should fill in the tire opening or it would just look silly.

It has been a while but, last week a used the truck to pull a F150 sized fish out of the lake. Someone thought it need a real deep cleaning.. 1/06/15, approx. air temp 52 F, we used our shop M931A2 "Ava" to pull a F150 from Calaveras Lake. Apparently, the truck wanted to go for a swim...

Took a few Black and White photos yesterday, Thought I would share.

Not at all, I'm not sure I ever had an idea of my own, mostly robbed from other SS members... I didn't even ask if they minded :twisted:

I wanted the extra fuel tank to fit between the tire rack and cab and still allow for using the bed rails bows and cover... If I was not using the extra Fuel Tank I would of left it further forward..

Update, Haven't done much but driving a round a bit, still have an front axle seal leak to fix. But did hook up one of the M332 Ammo trailers today and it looks pretty good if I do say so myself.. A few people were wondering about the short frame and overhang on the bed but looks and tows just...

I think I am going to keep both trucks, Remove the box from the M934 and put it on a gooseneck trailer. then turning the M934 truck into a long wheel base Tractor with sleeper or S-250 shelter behind the cab. Using the Trailer for storage now, but maybe a Man Cave/Travel trailer... How is...

A little update I have been very busy with work, but took a little step back and reinstalled the 5th wheel hitch for a one time run to pick my new trailer... The truck ran well for the 300+ Mile round trip and the new exhaust didn't get to hot... some of the original paint flaked off the 90...

Both and all the above.. I wanted to protect the fuel lines/vents on the top of the tank, they make a good step to go from the cab to the bed, they allow a good spot to add tools/boxes/Fuel-Water Jerry Cans between bed and cab/ect. and I like the way they look...

Total Length is 23feet 3 inches.

Agreed it seems to be especially warm at the 90 deg. turn down by the cab corner I haven't decided if I am going to wrap it or maybe some kind of shield.

Update, I was able to get a few hours in today installed the new exhaust system Straight 5 inch stack no muffler fabricated out of an Air Inlet tube (Thank you mdmorgan).. Also installed the tray back over the Passenger-side fuel tank. Still need to get to the drive-side... only some much time...

I have had the same problem and if you crack open the drain on the fuel filter while it is running you will get some fizz/foam Air out, also I have cracked open the return line on the pump (the line on the front of the pump closes to the timing cover) and the line just above the fuel filter just...

Ok haven't done much work on Ava (M931A2), But I Picked up this little jewel last weekend. It is a M934A2 with 510 hours and just under 3000 miles. It was missing the AC/Electric Heater but I picked one up from GL this week. I have several ideas and plans on what to do with her but I also have...

A Few people have been asking about starting/Priming the fuel system this is how I do it......... M939 A2 Series Priming Procedures 1) Make sure there is fuel in the tank. 2)Loosen the inlet fuel line on the injection...

Seats from 2000 ish Dodge Caravan (Middle Row Buckets) not all caravans have buckets in the middle row most are a bench seat but they are out there, I only have $100.00 bucks in the set.. the factory mounting is pretty nice, They were designed to be removable an lock into the floor.. When i get...

Update for Maccus and anyone else interested. Distance between Cab and Bed 9 3/8 inches Frame to back of bed 19 3/4 inches, Bumperettes to tailgate 7 inches, Just and F.Y.I. Center of Lynnette ring (Pintle Hook centerline) to back of bed would be 14 inches compared to a stock M923 is 6 1/2...

The Bumperettes I have are from a Deuce and are shorter than the 5 ton ones on top of the shorter frame of the Tractor it look like they are about 3-4 inches short of the tailgate stops... It doesn't bother me though I like the look and plan on Modifying the back of the bed for ramps and...

Ok I was able to get a little work done today. I did get the bed mounted, it is a moved 4 inches back further than where I had it sitting before. the shift back did require a little modifying on the front cross member on the bed for transfer case clearance. I was able to round up a extra fuel...

Added some more to the list of parts to be installed....