Search results

Update: took the relay apart and snapped the dam screw somehow. While fiddling with it I also broke the solder connection and need to re solder it. Once I drilled out the broken screw I re-tapped the threads. As I was doing such the lovely plastic snapped in 1/2. Anyone know where I can find one...

Update: Got my new (used) relay in the mail today! Before installing it I gave it a quick bench test and what'd you know? It works like a charm! I re-installed it and fired up the set holding my breath and crossing my fingers before flipping that switch. I flipped the switch, heard an audible...

I did the fleabay search and won a used one for 100$. Who knows the condition of this thing... mine had only 40 hours and it failed and it looked brand new when I took it out. The fleabay one looks all scratched up and dusty so who the the **** knows, I guess I'll find out soon. I'll keep you...

So I shouldent even try to look for the original one? I should try and find the contact industries? Do u guys think theses companies/manufacturers would even deal with a 1 item sale?

Ok so I removed the cover again and started the set to test it on the generator and nothing. So I took a block of wood and when flipping the circuit to closed it clicks but doesn't fully close. So just to test I pushed down on top of the open relay with the wood and instant power. I'm at the end...

I did test every termial. From what I can see when I had it all apart and would apply voltage is that the contacts don't fully touch the points when voltage is applied. When I push down on the middle contact pad rocker thing a little bit it fully makes contact and it completes the circuit and I...

Its the Magtek one Jag-6008

Ok so I took the whol relay apart and out of continues fiddling with it it seems that the magnet isn't strong enough to pull down the contact poles. I sanded everything down a bit to clean the it up a bit and to make the best possible contact, then re assembled it and installed it back into the...

How would one go about testing each contact point? Do I just give it voltage at x/y and check for continuity between the poles or is there something different I should do?

Ok so K-1 is out and disassembled and it looks brand new! Doesn't look like it's seen a drop of water at all. Also x/y when contacted with 24v does thump/ clunk

I'm so glad you guys are here and know whats going on! When I tested it with the jumper it didn't do a dam thing. Just sat there like a brick. I'm gonna go grab the machine now and see if I can get it out n try to disassemble it

Yes, I went along with the 24TM. The ac circuit interrupter relay is (4) in the diagnosis diagram not sure if it's k-1... I tested both the switch on the panel (which checked out ok) then removed the top panel from the set to gain access to the relay and tested it as per the TM and as far as I...

When the machine is off?

Hey guys so I start my generator, let it warm up, flip the switch and there and I notice that the green circuit open/closed bulb starts to fade out. I got power out of the terminals and the gauge shows my load percentage. So I puus to test and nothing... I shut the machine down, take the bulb...