Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
no got my springs from tim that saturday got the spring bolted in then started doing something else and sliced my heel open and had to get stitches:cry: so didnt get finished. then with all the rain we been getting. to follow all that up i broke the flexplate on my 3/4 ton so now i have to fix...
thought i would post this on here too since it was part of the truck. taking the stock bed and making a trailer, i took a set of m105 springs and mounted to the frame of the bed and modified the tongue off the 105 i cut for mu bob to fit inside the bed frame and will be bolted in. still have a...
used it to haul off the bogie to the scrap yard and it weighed more than i thought 900lbs and also got to see what the truck weighed to it came in at 10,660 with me in it and less than half tank of fuel. i weigh in at 260 so the truck is 10,400lbs thats also with the side boards on
thanks i just wish the brown was a lil darker. the paint card i had looked closer that it does now but it was dark when i was comparing them but it will do. still on my to do list is install reb kit and try to tuck exhaust closer to fender or move to under truck and out the back
here it is with 3 color camo the brown is sherwin williams sw6104 kaffe and the black is just black all sherwin williams a100 satin exterior acrylic paint i also painted the top dont know if it will hold up but top was faded bad so wanted to make it look new
heres the first coat of paint will do another tomorrow then still have to get the brown and black but i went to sherwin williams and had them try to match a good peice i had from under the hood and they couldnt match it. so i took there color chart and matched up close as i could and the color...
yes i have the hinges. i going back camo just going make it look new will most likely spray whole truck with green let it cure then roll on the black and brown
No big deal I should have checked it but didn't think about it. Id rather have the kit in than the spag anyway positive engagement and front and rear pull same speed instead of front slower. Thanks on way it looks its about to get new paint job soon as I get a weekend with no rain
Probly will be the hemtt wheels and I plan on flipping hubs with them. I can right now if I do the tire will hit the bed. I know they have to be alot easier to mount my 14.00r20s on than the stocks that was a job
i have a deal right now to get reb kit for transfer case since forward sprag is messed up. might pick up some paint tomorrow to repaint it. think i might try to get new wheels before lock outs
and another pic with cover on. also got all 3 belts changed and wasnt to bad doing compressor with a 1 13/16 wrench and big pair of channel locks and as you can see in the pic i need to seal the top of fuel tank
Might be checking drag link this evening wanders alot more on the interstate definetly have to pay attention and the roads here are not the best to start with need all the control I can have to keep it in the center of my lane but other than that truck did good this morning
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!