Search results

I put the nasty green silicone ones on on my maiden voyage through the bearings/seals/cylinders three years ago. Three years and two long trips later they are still holding. Putting the inner clamp on is a no brainer. The larger second one just takes a bit of patience. As others have...

Lot of Detroit iron in the show! Deuces on p. 18. Congrats!

Installed a solargizer, to replace the one that blew off when I hauled the whaleboat to the marina. Seems that someone forgot to pull if off of the hard top...duh! Need to drive it more...sigh.

I'd been planning on removing about a dozen old Japanese yews from the front of the house and putting in azaleas. Found the azaleas I wanted and thought I'd yank the yews with the F150...not! Might have worked if I'd had a pallet of concrete in the back. So.....got the deuce out of storage...

Did the weekly fire up. Chased the lugs and installed two nearly new tires on the rearmost left quarter. Laid ground work to get the table saw, jointer, and planer out of the back and into a shop-like setting. Hopefully this truck will go from warehouse to runabout soon!

Went to the storage site for its ~weekly fire up. Let it run at about 1000 for 15 minutes while I wistfully looked into the back where all the big woodworking machines still sit...sigh. They come out when the shed gets stretched, which happens after the deck gets dis-assembled, the elm comes...

1. Been wondering since day one why the grill frame wiggled when getting up to open the hood. Turns out the bolt holding the left 'strut' to the frame was missing, and the right-side bolt was about to fall out. Ended up replacing them [1/2-20 x 1.25] and the ?1/4 -24 x 1 3/4s? that hold the...