Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Thanks for this Guyfang. I bought my VR from gijoeczar. Not implying I got cheated. With my old machine, it could be something upstream or downstream of the VR causing the fuse to blow with the gijoeczar VR installed. Time permitting, I’m going to track down the root cause as I want the machine...
I read a lot of threads before digging into testing. In my case with a high voltage light, and a bad VR, the fuse remained good. In my research, I found a bad VR does not always blow the fuse. Again, that was the case with my machine.
Who did you buy your eBay VR from? I ask because I...
I followed the VR TM test instructions. See attachment for my results. It confirmed the VR was bad, so I replaced it with the VR kit Kurt Klopp’s sells. My machine works perfect now!
Arty, I'm having the same issue with my MEP-804a - over voltage. My voltage regulatory, rheostat, resistor, and power transformer are TRC. I can disconnect the A2 and the machine runs without holding S1 in the start position. I reset the fault switch on the MIF panel. My regulator and pot...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!