Search results

Im thinking one of the coolest things ive seen the last few days is to take one of our wheels and bore 6 of the 10 stud holes out big enough to slip over the existing wheel studs on steer axle and unbolt 4 studs opisit from each other and bolt this wheel to the one on the truck with a notch sut...

Im not sure how to explain what my vision is here other than think of say a record album being put back in its cardboard cover sleve ! Im saying dig a say 20 in deep narrow as possible slit in the ground flat face side facing stuck truck ! Maybe 2 of thema few feet apart that you could push...

Those disc are heavier than you think i dont see them going very far if it did pull out of the ground its all dead weight so just dont stand in front of or in the path of any winching ordeal for saftey sake !

Yea should test it out and thats one reason i thought a long as possible pipe/bar would displace weight across the disc

Im going to go with what ever the width of the side panel holder door is so i can slide that sise disc lieing flat with a couple chocker cables and some 16 in pieces of cold roll stock so maybe 18 to 20 inch disc and dont forget your round point shovel (very handy for many other things to have...

Im thinking the face of the anchor will have to be much larger to use on trucks that are this heavy im pretty sure the orange anchor above will just turn into a ripper tooth cutting a line in the ground all the way back to the stuck truck !

Just pull past the anchor with truck and pull it the other direction to remove from ground

Short chockers meeting in 1 spot for pull cable to hook to all of them ! I figure 2 seperate disk pos. would be a lot of anchor pull but add more if needed

Ive been thinking about this anchor and how and where would i put this some where on the truck that wouldnt be in the way the 99,9 percent of the time i didnt need it ! I think ive come up with something that might stow easier and have more anchor material for our heavier trucks to pull against...

Not saying this would have got him out but any time you do get one of these trucks in a greasy spot ! Use one foot on brake pedal and one on throttle doing light power brake will usally transfer spinning wheel torqe to non spinning side and cause it to turn so like a hillbilly limited slip and...