Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Theres many designs on youtube if you have a hitch that keeps the back of the truck clean till you need a crane/lift to do what ever then put it away !
The circle hole up top to slide the upright pipe up and thru to be able to bring straight down into a say 3 1/2 in cup so all weight rest there until you swing over the spare bolt your lift pipe to hinge pipe with bolts then bolt the support arm in place ! put the 4 bolts in bottom of hand crank...
Yea that sounds good ! ive got great hard spots/ corner structure but i dont want the wheel weight resting on the bolt lugs thru the wheels i just want them pulling the wheel against the wall / door and the v craddle holding the weight bouncing going down rough roads/trails so 2 independent...
Ive been studying it for months ! If you feel your bx structure is stout enough to swing 400 lbs out in mid air you can bolt or weld 2 pockets on the corner of rear box that the top piece would be and open circle of say 3 or 3 1/2 in that you can walk up and slide a piece of 2 1/2 or 3 pipe...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!