Search results

What did you use for a solenoid valve? I want to keep my flame heater working, I use it here in Michigan. I rebuilt my original style nozzle a month or so ago, but I suspect a leak. I've got stuff leaking out at the joint between the intake manifold and the head, and running down the block...

I have 98 of the #010 Square ones left (keeping 1 for a spare) aua The things we do for love...

Makes me feel better, you found the same spring and ball setup inside the end that the nozzle screws into. I've got my "O" rings, will reassemble tonight, I hope. Wish I could find those little fiber filters that are under the compression fittings.....mine were filthy dirty. Cleaned them up as...

These pics were posted on an older thread. What I see different in these than mine is there must still be a piece inside the body......and my spray nozzle only had a small ball and a small spring, instead of the three pieces on the penny in the pic. I hope the darn thing works and doesn't leak...

Here's what mine looked like. I had already taken the nozzle tip apart and reassembled, didn't get pics. By the way, the small "O" ring on the brass piece is a square cut ring. I ordered some from McMaster Carr, Square Buna-N "O"-ring, size 010.

Mine was not easy. One thing that I noticed, when "rapping" the valve body, I was rapping the end with the bore that the snap ring fits into on my workbench. After a lot of "firm" knocks, I noticed that either me or someone else had deformed the end of the valve by pounding that end. The bore...

Did you get your flame nozzle yet? I'm thinking of buying one from SECO as well, wonder if you had good luck. I got my valve assembly all apart, of course I did not find what I was looking for. In the nozzle "subassembly", I found the thread here that showed what looked like a pin, three-legged...