Search results

Look at the -34P TM figure 101 item 18 is the spring and parts that need replaced.

Did you have to trim the back mount to fit the hump? I am putting one in mine.

NSN is 5331-01-213-9966 P/N is 22591 see figure 18 in the 20-P TM.

Installed my JATONKA winter cold front today, took about 10 minutes

Did you put a winter front on it, even some card board blocking part would help alot. I have one on my dodge also with just a 12" round opening. Heats up quick.

Nice helper you have there![thumbzup]

Or do you have the drawings you would share for the rack?

Do you have pic's of your stero install? Thanks

You can't put this out without pic's :beer:

I bought a overhaul kit off GL it had the seal kit P/N 30405 which had all needed seals and o-rings. The top cover does use a gasket and is in the kit. But are not known to leak. If it leaks after being put back together the cover is easy to get to. For a kit try here 30405 - Fuel Systems -...

My truck had 82500 miles on it but the pump had been upgraded. It still had the old o-ring's and crumbled when we took them off, they are brown in color. The new o-rings are green in color. I did not turn the pump up, it runs just fine.

Asfor the cover it's like when you turn the pump up.

I had a friend do it for me who works on pumps but after seeing him do it, I think I could have done it my self. If you look at the Manuals you will see how it can be done. Pull the intake and pull the top cover off of pump, you will need to pull the transmission vacuum shift on side. Under it...

Put new o-ring's on the throttle shaft in the pump. Have not put intake back on yet.:beer:

Took the intake off today to fix leaking throttle shaft seal. Hope it goes back on as good as it came off.:beer:

My local shop was running a facebook special, safety inspection for free. Owner is former Army Motor pool, so I stopped by with my M1009 for the free inspection. Only a few minor leaks and all was in good shape.

I did a set of heads in the dish washer, that cost me a new dish washer!

Added a block heater to "THE DOG", just having fun driving it!!:beer:

nopics

I went to Menards and in there paint dept had 1 inch 2 inch and 3 inch stenciles for cheap.