• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. gimpyrobb

    Fuel pump not working (and how I troubleshot it)

    The slow blow fuses allow twice the rated current(milliseconds) at startup of a device. Helps keep the fuse from blowing all the time.
  2. gimpyrobb

    Fuel pump not working (and how I troubleshot it)

    Yes, a 20 amp is BAD, M-kay. I use a 5amp slow blow cause of the WMO. Yes, you can run a motor with out a radiator hooked up, just watch out for the water spraying out and make sure it isn't long. I would stay inder 3 or 4 min. The heat is from friction of the rings against the cyl...
  3. gimpyrobb

    Fuel pump not working (and how I troubleshot it)

    Well there ya go. SEARCH NAZI! :twisted:<--<-- the smiley makes it all better!
  4. gimpyrobb

    Fuel pump not working (and how I troubleshot it)

    Sorry, couldn't find them. I guess I didn't get a pic of the wire holding it together. Basicly I drilled one hole on the point side and two on the round end then wrapped the wire through. That cap will not come off now! Also, you should be able to check, with out the radiator in, just don't...
  5. gimpyrobb

    Fuel pump not working (and how I troubleshot it)

    Just so you know, if it makes no difference in starting, there is a "bottom" part on the fuel pump. These have a tendancy to fall off. When that happens, the pump does not pump fuel. You can tell by turning the electric on, and opening the petcock on the top of the secondary filter housings. If...
Top