Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Actually I could have a use for that one...
One customer brought his countershaft - worn beyond limit, where the bearing rides on. It sure could be saved by grinding/reducing that diameter to 43.8mm. But then I got a couple brand-new CS's, cheap... and sold him one of those. (Gimpy, you still...
That number 2nuo7 sounds very odd, should be NU207 ? Still incorrect for our application, if it had no "E" suffix....
Please see my recent post, here....
And this link shows the correct dims & specs for our Spicer 3052 & 3053 countershaft's front bearing...
Again, sorry for the...
The chart in post #16 has the correct bearing number: BL308 Z NR
(= 90×40×23 high load 11-ball deep groove ball bearing; one side shielded and the other side having a snap ring).
G.
Tom, actually when I first posted that chart, that was used to list the (commercial)bearing numbers, only.
But you are right; in order to avoid costly confusions we better have a chart that covers both model transmission gears - and their corresponding part numbers.
So I just inserted those 4...
That's the sleeve for 5th gear. And you are correct: that image is wrong; it needs to be flipped, the flanged side goes to the back of transmission.
Yes, the pin's head comes to rest in between two splines.
G.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!